NEC Neax 2000 IVS2 Manual page 81

CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN-PRI Programming
• For originating calls to the ISDN, do the following programming:
E
Assign ISDN access code to each trunk
CM20
route assigned by CM30 YY=00.
NOTE: LCR can be used with ISDN-PRI.
Refer to Feature Programming
Manual.
Specify the timing start when making an
CM08
ISDN call from an attendant.
Specify the timing start when making an
CM41
ISDN call from a Single Line Telephone
(PB/DP), D
required.
NOTE: A # or timing start is used for outgoing ISDN calls when LCR is not invoked.
Example: 1-214-555-1212 is dialed from a D
channel and ship the digits only after the timing start timer has expired or # is dialed
by the caller. The # sign tells the PBX that dialing is completed.
F
Page 70
DESCRIPTION
term
or Attendant Console, if
DATA
Y=0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Access code
(2) 100-163: Trunk Route 00-63
(1) 403
(2) 0 : Not available
1 : Available
Y=0
•
(1) 50
(2) 03-14: 3 sec.-14 sec.
If no data is set, the timing start is not
effective.
Recommended setting is 05 (5 seconds).
term
. The PBX will access a bearer
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0