INTRODUCTION
PURPOSE
This manual describes the hardware installation and programming procedure for the ISDN
service on the NEAX2000 IVS
OUTLINE OF THIS MANUAL
This manual contains the following chapters:
CHAPTER 1
GENERAL INFORMATION
This chapter explains the ISDN system outline, the equipment name and function, system
specifications, capacity, and conditions.
CHAPTER 2
INSTALLATION
This chapter explains the hardware installation procedure to provide ISDN interface to the PBX.
CHAPTER 3
SYSTEM DATA PROGRAMMING
This chapter explains the programming procedure to provide the ISDN feature to the PBX.
CHAPTER 4
CIRCUIT CARD INFORMATION
This chapter explains the mounting location, the meaning of lamp indications, and the method of
switch settings of each circuit card for the ISDN system.
CHAPTER 5
OPERATION TEST
This chapter explains the operation test to be performed after completion of the ISDN installation.
For fault diagnosis by MAT or CAT, refer to the Maintenance Manual.
2
NEAX2000 IVS
ISDN System Manual
ND-70919 (E), Issue 1.0
2
.
INTRODUCTION
Purpose
Page 1