NEC Neax 2000 IVS2 Manual page 113

CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
A
Specify the facility control of CPN (Calling
CM13
Party Number).
Assign the digit number of ISDN line
CM20
station number.
Specify whether the subaddress is sent to
CM08
ISDN when making a call from ISDN
Terminal, if required.
Specify the Calling Party Subaddress
which is sent to ISDN when making a call
from ISDN Terminal, if required.
Specify the forced release when a called
ISDN Terminal does not answer during 3
minutes, if required.
Assign CPN (Calling Party Number) which
is sent to ISDN when making a call from
ISDN Terminal, if required.
Specify the make busy of B channel (B1,
CME5
B2) for ISDN Terminal, if required.
END
Page 102
DESCRIPTION DATA
YY=25
•
(1) X-XXXXXXXX: ISDN Line Station No.
(2) 0 : Provided
1 : Not provided
• Y=0-3
(1) X-XXXX: Access Code
(2) 801-808: 1 digit-8 digits
(1) 430
(2) 0 : Sent (As per CM08>431)
1 : Not sent
(1) 431
(2) 0 : ISDN Line Station No. assigned by
CM10
1 : ISDN Terminal No.
(1) 432
(2) 0 : Not available
1 : Available
(1) 434
(2) 0 : CPN entered in ISDN Terminal
1 : CPN assigned by CM12 Y=12/13
• Y=2
,
(1) XXXXXXXX Z
XXXXXXXX: ISDN Line Station No.
Z: 0: B1 channel
1: B2 channel
(2) 0 : Make busy
1 : In service
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0