NEC Neax 2000 IVS2 Manual page 131

CHAPTER 3 SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
B
Specify the number of digits to be received
CM35
on DID.
NOTE 1: This data should be assigned to
Determine trunk seizure sequence.
NOTE 2: This data should be assigned to
Select trunk seizure sequence.
CM08
Assign the Number Conversion Block
CM76
number.
C
Page 120
DESCRIPTION
the B channel trunk route. For
D channel trunk route, no data
setting is required.
both B channel trunk route and
D channel trunk route.
DATA
YY=09 Incoming Connection Signaling
•
(1) 00-63: B channel Trunk Route No.
NOTE 1
(2) 08: ISDN Indial
YY=16
•
Hooking Signal Sending to outside
(1) 00-63: B channel Trunk Route No.
NOTE 1
(2) 0: Not sending
YY=18 Digit conversion on DID call
•
(1) 00-63: B channel Trunk Route No.
(2) 0 : To provide
1 : Not provided
• YY=28 Outgoing Trunk Queuing
(1) 00-63: B channel Trunk Route No.
NOTE 1
(2) 0: Restricted
• YY=83
(1) 00-63: B channel Trunk Route No.
(2) 0: As per CM08>078
YY=90
•
Assignment of BRT route for ISDN
(1) 00-63: B channel/D channel Trunk
Route No.
(2) 2: ISDN-Basic Rate Interface
(1) 078
(2) 1 : Lowest available trunk
YY=00
•
(1) X-XXXX: DID No.
(2) 000-999: Number Conversion Block
No.
NEAX2000 IVS
NOTE 1
NOTE 1
NOTE 2
2
ISDN System Manual
ND-70919 (E), Issue 1.0