4 Guide to the Routine Maintenance Using the System
Monitor Interface
4.4 Check the RAID Group Status
This section describes how to check the RAID group status on the system monitoring
interface. By checking the RAID group status, you can know whether the RAID group works
normally.
Impact on the System
None.
Reference Standard
The normal state of a RAID Group is Optimal.
Procedure
Step 1 Log in to the system monitoring interface.
For the detailed procedure, see
Step 2 Expand the node in the navigation tree, and then click RAID, as shown in
Figure 4-10 RAID option
Step 3 View the RAID group status, as shown in
description.
4-10
Log into the system monitoring
Figure
Symantec Corporation
interface.
4-11.
Table 4-4
lists the parameter
NetBackup 5020
Routine Maintenance
Figure
4-10.
Issue 01 (2010-12-10)