Viewing Hardware Alerts; Figure 4-1 Login Interface - Symantec NetBackup 5020 Routine Maintenance

4 Guide to the Routine Maintenance Using the System
Monitor Interface

4.1 Viewing Hardware Alerts

This section describes how to view hardware alerts on the system monitoring interface of the
NetBackup 5020 management software. By viewing current hardware alerts, you can know
whether errors occur on the hardware and timely correct the errors.
Impact on the System
None.
Reference Standard
None.
Procedure
Step 1 Log in to the system monitoring interface.
1.

Figure 4-1 Login interface

2.
3.
4-2
Open a browser on a Windows PC. Enter https://xxx.xxx.xxx.xxx in the address bar (the
xxx.xxx.xxx.xxx is the IP address of the service network port of the NetBackup 5020).
Press Enter and the login interface is displayed, as shown in
Enter the user name and password respectively in the User Name and Password text
boxes.
The default user name and password are respectively root and root.
Click Log on and the main interface of the NetBackup 5020 is displayed, as shown in
Figure 4-2.
Symantec Corporation
NetBackup 5020
Routine Maintenance
Figure 4-1.
Issue 01 (2010-12-10)