Figure 3-2 Rear View - Symantec NetBackup 5020 Routine Maintenance

3 Guide to Routine Maintenance on Equipment Site
Location
SATA disk
module
a: A location command is sent through the management system.

Figure 3-2
Table 3-4

Figure 3-2 Rear view

1
3
3-6
Type
indicator
Disk online
status indicator
Disk read/write
status indicator
Check indicator status in the rear view of the NetBackup 5020
shows the rear view of the NetBackup 5020.
lists the indicator status of the rear view of NetBackup 5020.
Power running/alarm
indicator
Active indicator for the
service network interface
(NIC1/NIC2)
Symantec Corporation
Color Status
Blinking
Orange On
- Off
Green On
Red On
- Off
Green Blinking
- Off
2 Link indicator for the service network interface
(NIC1/NIC2)
4 Active indicator for the IPMI management
network interface
NetBackup 5020
Routine Maintenance
Description
A fault occurred on the
power module.
The device is being located
a
.
The device is running
normally.
The disk is powered on.
A disk alarm occurred or
the device is being located
a
.
The disk is not powered on.
The device is transferring
data.
The device is not
transferring data.
Issue 01 (2010-12-10)