4 Guide to the Routine Maintenance Using the System
Monitor Interface
5.
Step 2 Expand the node in the navigation tree, and then click Hardware Alerts, as shown in
4-4.
Figure 4-4 Hardware Alerts option
Step 3 View hardware alarms in the alarm list, as shown in
description.
Figure 4-5 Alarm list
Table 4-1 Description of alarm parameters
Parameter
ID
Time
4-4
In the navigation tree, unfold the IP address node and check the hardware status.
Description
The ID of an alarm, representing an alarm.
The time when the alarm occurs. The format is
YYYY-MM-DDThh:mm:ss.
Symantec Corporation
Routine Maintenance
Figure
4-5.
Table 4-1
lists the parameter
Issue 01 (2010-12-10)
NetBackup 5020
Figure