Safety Precautions; Warning And Safety Identifier - Symantec NetBackup 5020 Routine Maintenance

NetBackup 5020
Routine Maintenance
About This Chapter
This section describes the precautions for routine maintenance.

1.1 Warning and Safety Identifier

When you install and maintain equipment, observe warning and safety identifier precautions
to prevent personal injury or equipment damage.
1.2 ESD Prevention
When you install and maintain equipment, follow safety precautions of ESD prevention to
ensure personal safety and avoid equipment damage.
1.3 Laser Safety
When you install and maintain the device, you must follow the laser safety precautions to
ensure the safety of the human body and the device.
1.4 Using Optical Fiber
You should use optical fibers properly to ensure the normal running of the device; otherwise,
bodily injury or device damage may be caused.
1.5 Short-Circuit Protection
When you install or maintain the device, use tools according to the regulations to avoid short
circuit as a result of metallic tools.
1.6 Electrical Safety
When you install and maintain the equipment, follow the electrical safety precautions to avoid
device damage or bodily injury.
1.1 Warning and Safety Identifier
When you install and maintain equipment, observe warning and safety identifier precautions
to prevent personal injury or equipment damage.
Table 1-1
Issue 01 (2010-12-10)
lists the warning and safety identifiers on the NetBackup 5020 and their meanings.
Symantec Corporation
1

Safety Precautions

1 Safety Precautions
1-1