Table 3-5 Description Of The Indicators Of The 10Ge Nic - Symantec NetBackup 5020 Routine Maintenance

3 Guide to Routine Maintenance on Equipment Site
Figure 3-3 10GE NIC

Table 3-5 Description of the indicators of the 10GE NIC

Location
10GE NIC
----End
Exception Handling



3-8
Type
ACT/LNK
GRN=10GE
System power indicator
If the indicator is off, see "Device Cannot Be Powered On" in the NetBackup 5020
Hardware Troubleshooting Guide.
System alarm/location indicator
If the indicator is on, see "System Alarm/Location Indicator Is Red On" in the
NetBackup 5020 Hardware Troubleshooting Guide.
Disk online status indicator
− If the disk online status indicator blinks red, see "Disk Online Status Indicator Is Red
On" in the NetBackup 5020 Hardware Troubleshooting Guide.
Symantec Corporation
Color Status
Green Blinking
Green On
- Off
- Off
Green On
Yellow On
NetBackup 5020
Routine Maintenance
Description
The link is normal and data is
being transferred.
The link is normal.
No link.
No link.
Data is being transferred at a
rate of 10 Gbit/s.
Data is being transferred at a
rate of 1 Gbit/s.
Issue 01 (2010-12-10)