Hardware Structure - Symantec NetBackup 5200 Product Description

NetBackup 5200
Product Description
Item
Disk type and quantity
RAID level
I/O port
a: 1 U = 44.45 mm
b: 3rd Generation Double Data Rate SDRAM
c: Serial Advanced Technology Attachment
d: Video Graphics Array
e: Universal Serial Bus
f: Gigabit Ethernet

1.3 Hardware Structure

This section describes the hardware structure of the NetBackup 5200.
The NetBackup 5200 can be configured in two modes, as shown in
Issue 02 (2011-03-28)
Index
Twenty-four 2 TB 7,200 rpm SATA
l
Maximum raw capacity: 48 TB
l
RAID 1 and RAID 6
System disk: RAID 1
l
Data disk: RAID 6
l
One 100 Mbit/s IPMI management network port
l
d
One VGA port
l
One RJ-45 serial port, with a transfer rate of 115,200 baud rate
l
e
Two USB 2.0 ports
l
f
Two GE service network ports, with the RJ-45 connector and
l
link/active indicator
Configuration mode 1:
l
Two 10GE service network ports or four GE service network
–
ports
Two 8Gb FC ports
–
Configuration mode 2:
l
Six 8Gb FC ports
Symantec Corporation
1 Product Introduction
c
disks
Table 1-2.
1-3