[Advanced Menu] Menu; [Digital Cinema Reality]; [Blanking] - Panasonic PT-FRQ50 Operating Instructions Manual

[ADVANCED MENU] menu

On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the sub-
menu.
Refer to "Navigating through the menu" ( x page 61) for the operation of the menu screen.

[DIGITAL CINEMA REALITY]

The picture quality is enhanced by raising the vertical resolution higher performing the cinema processing when
interlaced video signal is input.
1) Press as to select [DIGITAL CINEMA REALITY].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[OFF]
[30p FIXED]
[25p FIXED]
Note
f In [DIGITAL CINEMA REALITY], the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30p
FIXED]. (Vertical resolution will degrade.)
f When the [ADVANCED MENU] menu → [FRAME RESPONSE] is set to [FAST], [DIGITAL CINEMA REALITY] cannot be set.

[BLANKING]

Adjust the blanking width if there is a noise at the edge of the screen or the image is slightly running out from the
screen.
1) Press as to select [BLANKING].
2) Press the <ENTER> button.
f The [BLANKING] adjustment screen is displayed.
3) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT].
4) Press qw to adjust the blanking width.
Blanking correction
Top of the screen
Bottom of the screen [LOWER]
Left side of the
screen
Right side of the
screen
82 - ENGLISH
Chapter 4 Settings — [ADVANCED MENU] menu
Automatically detects the signal and performs the cinema processing. (Factory default setting)
Does not perform cinema processing.
When 60 Hz vertical scanning frequency signals are input
When 50 Hz vertical scanning frequency signals are input
Item Operation
The blanking zone
Press q .
moves upward.
[UPPER]
The blanking zone
Press w .
moves downward.
The blanking zone
Press w .
moves upward.
The blanking zone
Press q .
moves downward.
The blanking zone
Press w .
moves to the right.
[LEFT]
The blanking zone
Press q .
moves to the left.
The blanking zone
Press q .
moves to the right.
[RIGHT]
The blanking zone
Press w .
moves to the left.
Performs forced cinema processing
(2:2 pulldown).
Adjustment Range of adjustment
Top and bottom 0 - 1079
Left and right 0 - 1919