Panasonic PT-FRQ50 Operating Instructions Manual page 93

[ENABLE]
[DISABLE]
Note
f Even if [AUTO GAMMA SELECT] is set to [ENABLE], when the information required for the HDR (High Dynamic Range) support is not
included in the InfoFrame information added to the displayed image signal, the gamma mode is not automatically set and follows the setting
in the [PICTURE] menu → [GAMMA].
Setting [AUTO COLOR SPACE SELECT] in [HDMI1 IN] or [HDMI2 IN]
Set this item when the color space is to be automatically set based on the InfoFrame information added to the
image signal.
1) Press as to select [HDMI1 IN] or [HDMI2 IN].
2) Press the <ENTER> button.
f The [HDMI1 IN] screen or the [HDMI2 IN] screen is displayed.
3) Press as to select [AUTO COLOR SPACE SELECT].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
Note
f Even if [AUTO COLOR SPACE SELECT] is set to [ENABLE], when the information required for the HDR (High Dynamic Range) support
is not included in the InfoFrame information added to the displayed image signal, the color space is not automatically set and follows the
setting in the [PICTURE] menu → [COLOR SPACE].
Setting [EDID SELECT] in [HDMI1 IN] or [HDMI2 IN]
1) Press as to select [HDMI1 IN] or [HDMI2 IN].
2) Press the <ENTER> button.
f The [HDMI1 IN] screen or the [HDMI2 IN] screen is displayed.
3) Press as to select [EDID SELECT].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[4K/60p/HDR]
[4K/60p/SDR]
[4K/30p]
[2K]
Note
f Switch the setting to [4K/30p] when proper image is not projected while [EDID SELECT] is set to [4K/60p/HDR] or [4K/60p/SDR] and the 4K
image signal is input.
f Switch the setting to [2K] when proper image is not projected while [EDID SELECT] is set to [4K/60p/HDR], [4K/60p/SDR], or [4K/30p] and
the 2K image signal or lower is input.
f For details of the signal described in EDID of [4K/60p/HDR], [4K/60p/SDR], [4K/30p], or [2K], refer to "List of plug and play compatible
signals" ( x page 214).
Chapter 4 Settings — [DISPLAY OPTION] menu
Select this item when the gamma mode is to be automatically set to the one compatible with HDR (High
Dynamic Range) based on the InfoFrame information added to the image signal. In such case, the
[PICTURE] menu → [GAMMA] is set to [HDR ST2084-500], [HDR ST2084-1000], or [HDR HLG].
Select this item when the gamma mode is not to be automatically set and to specify the gamma mode
with the [PICTURE] menu → [GAMMA].
Select this item when the color space is to be automatically set to the one compatible with HDR (High
Dynamic Range) based on the InfoFrame information added to the image signal. In such case, the
[PICTURE] menu → [COLOR SPACE] is set to [ITU-2020 emu.].
Select this item when the color space is not to be automatically set and to specify the color space with
the [PICTURE] menu → [COLOR SPACE].
Switches to EDID corresponding to the 4K image signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 60 Hz).
This is EDID supporting HDR (High Dynamic Range).
Switches to EDID corresponding to the 4K image signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 60 Hz).
This is EDID supporting SDR (Standard Dynamic Range). This does not support HDR (High Dynamic
Range).
Switches to EDID corresponding to the 4K image signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 30 Hz).
Switches to EDID corresponding to the 2K image signal (maximum 1 920 x 1 200 dots) or lower.
ENGLISH - 93