Panasonic PT-FRQ50 Operating Instructions Manual page 169

Item
[Common Name]
[Country]
[State]
[Locality]
[Organization]
[Organization Unit]
[CRT key]
3) Click [OK].
f Self-signed certificate is generated.
Note
f The characters that can be input are as follows.
g Single-byte numbers: 0 to 9
g Single-byte alphabets: A to Z, a to z
g Single-byte symbols: - . _ , + / ( )
Confirming the information of the self-signed certificate
Confirm the information of the self-signed certificate generated by the projector.
1) Click [Certificate] → [Self-signed Certificate] → [Information] → [Confirm].
f The information of the generated self-signed certificate is displayed. The details of each item are as follows.
Item
[Common Name]
[Country]
[State]
[Locality]
[Organization]
[Organization Unit]
[Not Before]
[Not After]
[CRT key]
Note
f The generated self-signed certificate can be deleted by clicking [Certificate] → [Self-signed Certificate] → [Delete].
However, it cannot be deleted when [HTTPS set up] → [Connection] is set to [HTTPS]. Delete it after changing the setting to perform the
HTTP communication.
[HTTPS set up] page
Set this page when HTTPS (Hypertext Transfer Protocol Secure) communication encrypted with the SSL/TLS
protocol is to be performed between the computer and the projector while the web control function is used.
Click [Detailed set up] → [HTTPS set up].
To perform the HTTPS communication, it is necessary to install the certificate for authentication into the projector
in advance. For details of installing the certificate, refer to "[Certificate] page" ( x page 164).
Chapter 5 Operations — Using the web control function
Enter the projector name or the IP address set in the projector.
Enter the country code defined in ISO 3166-1 alpha-2 (two upper case alphabets).
Enter the State, etc.
Enter the locality.
Enter the organization name.
Enter the organization unit name.
[RSA key size] The key length of the current CRT key is displayed.
[Last modified] The generation date and time of the current CRT key is displayed.
The projector name or the IP address is displayed.
The country code defined in ISO 3166-1 alpha-2 (two upper case alphabets) is displayed.
The State, etc. is displayed.
The locality is displayed.
The organization name is displayed.
The organization unit name is displayed.
Displays the date and time that the self-signed certificate was issued.
Displays the date and time that the self-signed certificate will expire (local time corresponding to 23:59,
December 31, 2035 in Greenwich Mean Time).
[RSA key size]
The key length of the CRT key is displayed.
[Last modified] The generation date and time of the CRT key is displayed.
Details
Details
Character length
limit
64 characters
―
128 characters
128 characters
64 characters
64 characters
―
―
ENGLISH - 169