Panasonic PT-FRQ50 Operating Instructions Manual page 124

1) Press as to select [HDMI CEC].
2) Press qw to select [ON].
3) Press the <ENTER> button.
f The [HDMI CEC] screen is displayed.
4) Press as to select [HDMI 1] or [HDMI 2].
f Select the input corresponding to the CEC-compatible device you want to operate.
f Proceed to Step 6) when the device to operate is displayed.
5) Press qw to switch the item.
f The devices will switch when multiple CEC-compatible devices are connected to one input.
f Select the device to operate.
6) Press as to select [HDMI-CEC OPERATION].
7) Press the <ENTER> button.
f The HDMI-CEC operation screen is displayed.
8) Select the item displayed on the HDMI-CEC operation screen to operate the device.
f Refer to the "Using HDMI-CEC function" ( x page 182) for the operation details.
Note
f If no CEC-compatible device is connected to <HDMI IN 1> or <HDMI IN 2> terminal, there is no device displayed at [HDMI 1] or [HDMI 2]
and [----] is displayed.
f To exit the HDMI-CEC operation screen, press the <RETURN> button or <MENU> button.
Changing the menu code
The menu code that calls up the operation menu of the CEC-compatible device varies depending on the device
manufacturer. If you cannot call up the operation menu of a CEC-compatible device from the HDMI-CEC operation
screen, change the menu code setting.
1) Press as to select [HDMI CEC].
2) Press qw to select [ON].
3) Press the <ENTER> button.
f The [HDMI CEC] screen is displayed.
4) Press as to select [MENU CODE].
5) Press qw to switch the item.
f The items will switch each time you press the button.
f Select the menu code from [1] to [6].
Setting the link control
Make settings for the link control between the projector and CEC-compatible devices.
[PROJECTOR -> DEVICE]
Set the link control from the projector to the CEC-compatible device.
1) Press as to select [HDMI CEC].
2) Press qw to select [ON].
3) Press the <ENTER> button.
f The [HDMI CEC] screen is displayed.
4) Press as to select [PROJECTOR
5) Press qw to switch the item.
f The items will switch each time you press the button.
124 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
->
DEVICE].