[Audio Setting] - Panasonic PT-FRQ50 Operating Instructions Manual

[AUDIO SETTING]

Set audio functions in detail.
Adjusting the volume
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [VOLUME].
4) Press qw to adjust the level.
Operation
Press w .
Press q .
Adjusting the left to right audio balance
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [BALANCE].
4) Press qw to adjust the level.
Operation
Press w .
Press q .
Setting audio output in the standby mode
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [IN STANDBY MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f No audio is output in the standby mode when the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to
[ECO].
Setting audio output while using the shutter function
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [IN SHUTTER].
4) Press qw to switch the item.
f The items will switch each time you press the button.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Increases the volume.
Decreases the volume.
Increases the volume on the right.
Increases the volume on the left.
No audio is output during standby.
Audio is output during standby.
Adjustment
Adjustment
Range of adjustment
0 - 63
Range of adjustment
L16 - R16
ENGLISH - 119