[Data Cloning]; [Save All User Data]; [Load All User Data]; [Hdmi Cec] - Panasonic PT-FRQ50 Operating Instructions Manual

[DATA CLONING]

Perform the operation of the data cloning function. Data such as the settings and adjustment values of the
projector can be copied to multiple projectors via LAN or using the USB memory.
For details of operation, refer to "Using the data cloning function" ( x page 178).

[SAVE ALL USER DATA]

Save the various setting values as a backup in the built-in memory of the projector.
1) Press as to select [SAVE ALL USER DATA].
2) Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
4) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
f [PROGRESS] is displayed while saving data.
Note
f Data set from the computer application is not included in [SAVE ALL USER DATA].
f The data saved by executing [SAVE ALL USER DATA] is not deleted even if the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY
RESET] is executed.

[LOAD ALL USER DATA]

Load the various setting values saved as a backup in the built-in memory of the projector.
1) Press as to select [LOAD ALL USER DATA].
2) Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
4) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f The projector enters the standby mode to reflect the setting values when [LOAD ALL USER DATA] is executed.
f Data registered from a computer is not included in [LOAD ALL USER DATA].

[HDMI CEC]

Sets the CEC (Consumer Electronics Control) function of HDMI.
CEC is a function that is realized by exchanging device control signals with external devices connected with
an HDMI cable. Using the remote control of the projector, it is possible to operate the CEC-compatible external
device (hereinafter referred to as "CEC-compatible device") and to control the power on/off link status between the
projector and the CEC-compatible device.
For details on how to use the CEC function, refer to "Using HDMI-CEC function" ( x page 182).
1) Press as to select [HDMI CEC].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Operating a CEC-compatible device
Operate the CEC-compatible device connected to the <HDMI IN 1> terminal or <HDMI IN 2> terminal.
[HDMI-CEC OPERATION] can be operated when HDMI1 input or HDMI2 input is selected. Switch to the input that
is corresponding to the CEC-compatible device you want to operate in advance.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Enables the CEC function.
Disables the CEC function.
ENGLISH - 123