Setting The Boiler's Chimney Sweep Function - Biasi RINNOVA ADAPTIVE 25S User Manual And Installation Instructions

32
Figure 9.19
9.13 Setting the boiler's chimney
sweep function
With the boiler set to chimney sweep mode,
some automatic boiler functions can be dis-
abled, which makes checking and monitoring
operations easier.
• Enter "programming mode" by pressing the
13 and 15 keys simultaneously for 5 seconds
(Figure 9.20) until HiS (Boiler History) ap-
pears on the LCD display (Figure 9.21).
12
13
Figure 9.20
- 72 -
MAINTENANCE
17
16
15
14
Figure 9.21
• Scroll through the various menus by press-
ing the keys 13 (back) or 15 (forward), until
ChS (Chimney sweep) appears on the LCD
display (Figure 9.22).
• Press the 14 key for 1 second to enter the se-
lected menu.
Figure 9.22
Chimney sweep function at minimum out-
put in domestic hot water mode
• Scroll through the various parameters by
pressing the keys 13 (back) or 15 (forward)
until LP, which alternates with the minimum
heating water temperature (e.g.45), appears
on the LCD display indicating the activation
of the "chimney sweep function" at minimum
power (Figure 9.23).
Figure 9.23