Setting The Boiler's Chimney Sweep Function - Biasi RINNOVA Series User Manual And Installation Instructions

Model M290E.24CM
Nominal heat input
Nominal efficiency
Combustion efficiency
Air index
Composition of CO2 fumes
Composition of O2 fumes
Flue gas temperature
Values refer to tests with 60/100 1 m concentric
discharge and Methane gas G20 and with heating
delivery/return temperature of 60°/80°C
Figure 9.8
Model M290E.28CM
Nominal heat input
Nominal efficiency
Combustion efficiency
Air index
Composition of CO2 fumes
Composition of O2 fumes
Flue gas temperature
Values refer to tests with 60/100 1 m concentric
discharge and Methane gas G20 and with heating
delivery/return temperature of 60°/80°C
Figure 9.9
Model M290E.32CM
Nominal heat input
Nominal efficiency
Combustion efficiency
Air index
Composition of CO2 fumes
Composition of O2 fumes
Flue gas temperature
Values refer to tests with 60/100 1 m concentric
discharge and Methane gas G20 and with heating
delivery/return temperature of 60°/80°C
Figure 9.10
- 58 -
MAINTENANCE
9.11 Setting the boiler's chimney
kW 25,5
With the boiler set to chimney sweep mode,
some automatic boiler functions can be dis-
% 92,8
abled, which makes checking and monitor-
% 93,7
ing operations easier.
n 1,7
• Enter "programming mode" by holding
% 6,9
% 8,6
°C 123
kW 31,1
% 93,3
% 94,8
n 1,5
% 7,6
Figure 9.11
% 7,3
°C 111
Figure 9.12
kW 33,9
Chimney sweep function at minimum
% 93,1
output in domestic hot water mode
% 94,1
• Scroll through the various parameters us-
n 1,6
% 7,2
% 8,1
°C 125
Figure 9.13
sweep function
down buttons 17 and 18 for 5 seconds
at the same time (Figure 9.11). The code
P00 appears on the display, indicating en-
try into "parameter P00" (Figure 9.12).
18
12
13
ing 12 or 13 until the LCD display shows
the code P06, indicating entry into "pa-
rameter P06" (Figure 9.13).
17
16
15
RESET
bar
RESET
bar