Biasi RINNOVA ADAPTIVE 25S User Manual And Installation Instructions page 11

BOILER DESCRIPTION
LCD FUNCTION
DHW set temperature
(all other symbols are
disabled).
Delay burner ignition
due to system setting
(flashing uu + flashing
temperature).
Boiler in chimney sweep
function.
To activate the chimney
sweep function, set "pa-
rameter P32=1 ... 4". The
following is displayed:
LP = minimum DHW
hP = minimum output in
heating mode
cP = maximum output in
heating mode
dP=maximum DHW.
The transition occurs
with buttons 16 (in-
crease) and 13 (decrease)
DHW temperature.
3 star preheating func-
tion active.
When the symbol
flashes, the function is in
process.
Constantly illuminated:
solar control unit con-
nected.
When the symbol
flashes, the solar circuit
pump is in operation.
- 11 -