Checking The Condensate Discharge Siphon; Setting The Boiler's Chimney Sweep Function - Biasi RINNOVA ADAPTIVE User Manual And Installation Instructions

following.
Model M300V.2025 SM
Nominal heat input
Nominal efficiency
Combustion efficiency
Air index
Composition of CO2 fumes
Composition of O2 fumes
Composition of CO fumes
Flue gas temperature
Values refer to tests with 80 mm 1 + 1 m twin pipe
discharge and Methane gas G20 and with heating
delivery/return temperature of 60°/80°C
Figure 9.16
Model M300V.3035 SM
Nominal heat input
Nominal efficiency
Combustion efficiency
Air index
Composition of CO2 fumes
Composition of O2 fumes
Composition of CO fumes
Flue gas temperature
Values refer to tests with 80 mm 1 + 1 m twin pipe
discharge and Methane gas G20 and with heating
delivery/return temperature of 60°/80°C
Figure 9.17
9.12 Checking the condensate dis-
charge siphon
The condensate discharge siphon 32 (Figure
9.18) does not require particular maintenance.
Simply check:
• that solid deposits have not formed and re-
move them if necessary.
• that the condensate outlet pipes are not ob-
structed.
To clean the inside of the siphon, simply re-
move it and turn it upside down so that any
impurities can be extracted.
- 64 -
MAINTENANCE
kW 21,0
% 98,4
32
% 98,7
n 1,3
% 8,5 - 9,5
% 4,8
ppm 220
°C 78
kW 31,0
Figure 9.18
% 98,8
% 99,0
9.13 Setting the boiler's chimney
n 1,7
% 8,5 - 9,5
With the boiler set to chimney sweep mode,
% 4,8
some automatic boiler functions can be dis-
ppm 200 abled, which makes checking and monitoring
operations easier.
°C 78
• Enter "programming mode" by pressing the
Figure 9.19
sweep function
13 and 15 keys simultaneously for 5 seconds
(Figure 9.19) until HiS (Boiler History) ap-
pears on the LCD display (Figure 9.20).
17
12
13
14
16
15