Setting The Boiler's Chimney Sweep Function - Biasi RINNOVA COND 24S User Manual And Installation Instructions

31
Figure 9.14
9.11 Setting the boiler's chimney
sweep function
With the boiler set to chimney sweep mode,
some automatic boiler functions can be dis-
abled, which makes checking and monitor-
ing operations easier.
• Enter "programming mode" by holding
down 17 and 18 for 5 seconds at the same
time (Figure 9.15). The code P00 appears
on the display, indicating entry into "pa-
rameter P00" (Figure 9.16).
- 66 -
MAINTENANCE
12
13
Figure 9.15
Figure 9.16
Chimney sweep function at minimum
output in domestic hot water mode
• Scroll through the various parameters us-
ing 12 or 13 until the LCD display shows
the code P06, indicating entry into "pa-
rameter P06" (Figure 9.17).
Figure 9.17
• Press 16 (Figure 9.15) to show the value
of parameter P06 on the LCD display (Fig-
ure 9.18).
Figure 9.18
18 17
RESET
bar
RESET
bar
RESET
bar
16
15