Biasi RINNOVA ADAPTIVE 25S User Manual And Installation Instructions page 52

12
13
Figure 5.33
Figure 5.34
• Scroll through the various menus by pressing
the keys 13 (back) or 15 (forward), until PAr
(Parameters menu) appears on the LCD display
(Figure 5.35).
• Press the 14 key for 1 second to enter the se-
lected menu.
Figure 5.35
• Scroll through the various parameters by press-
ing the keys 13 (back) or 15 (forward), until P14,
which alternates with the parameter value, ap-
pears on the LCD display (Figure 5.36).
- 52 -
INSTALLATION
17
16
15
14
Figure 5.36
• Press the 14 key for 1 second (Figure 5.33) to
enter the selected parameter. The display will
show the following (Figure 5.37).
Figure 5.37
• Pressing the 13 or 15 keys, it is possible to
change the value of parameter 14 from a min-
imum of 00 to a maximum of 60 based on the
selected curve of the K coefficient in Figure
5.32 (the value shown on the display, in Figure
5.38, corresponds to K = 1.5).