Data Compression Ratio For Color Send Jobs - Canon Color imageRUNNER C2880i Sending And Facsimile Manual

Data Compression Ratio for Color Send Jobs

You can set the compression ratio for color scanned data. A high compression ratio
reduces the amount of memory used for the document, but results in low quality
images. On the contrary, a low compression ratio increases the amount of memory
used for the document, but results in high quality images.
NOTE
•
If [PDF (Compact)] or [PDF (Trace)] is selected as the file format, set [Data Compression
Ratio] to 'Normal' or 'Low Ratio' in TX Settings under <Common Settings> in
Communications Settings (from the Additional Functions screen). If [Data Compression
Ratio] is set to 'High Ratio', the images that are output may be of a low quality even if
'Image Priority' is selected in Image Level for PDF (Compct) in TX Settings under
<Common Settings> in Communications Settings (from the Additional Functions screen).
•
If the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed, and
you are sending documents by fax, this setting is disabled.
1
Press
➞ [TX Settings] under <Common Settings> ➞ [Data
Compression Ratio].
2
Select [High Ratio], [Normal], or [Low Ratio] ➞ press [OK].
Details of each item are shown below.
[High Ratio]: A small amount of memory is used for the document, but the
[Normal]:
[Low Ratio]: A large amount of memory is used for the document, but the
(Additional Functions) ➞ [Communications Settings]
images are of a low quality.
The amount of memory used for the document and the quality of
the images are moderate, between the High and Low Ratio
settings.
images are of a high quality.

Data Compression Ratio for Color Send Jobs

9
9-11