Automatic Document Deletion - Canon Color imageRUNNER C2880i Sending And Facsimile Manual

Automatic Document Deletion

If transmission of a document has failed, this mode automatically erases that
document from memory.
1
2
9
9-10

Automatic Document Deletion

(Additional Functions) ➞ [Communications Settings]
Press
➞ [TX Settings] under <Common Settings> ➞ [Erase Failed
TX].
Select [On] or [Off] ➞ press [OK].
Details of each item are shown below.
[On]: Erases jobs after sending, whether the transmission ends successfully or
with an error.
[Off]: Stores a job in memory if the transmission ends in an error. On the System
Monitor screen, you can resend jobs whose transmissions have failed, or
change the destinations and resend the jobs. (See "Changing the
Destination," on p. 8-5, and "Resending a Job," on p. 8-7.)
IMPORTANT
Even if the Erase Failed TX mode is set to 'Off', fax documents sent in the Direct
Sending or Manual Sending mode, or sent from computers via the fax driver do not
remain in memory when the transmission ends in an error.