1
Press
➞ [Restrict the Send Function] ➞ [Restrict New Addresses].
2
Select [Fax], [E-mail], [I-Fax], or [File].
3
Select [On] or [Off] ➞ press [OK].
Setting Whether to Allow Sending Using the Fax Driver
You can set whether to disable the sending of faxes using the fax driver.
NOTE
This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.
1
Press
[Restrict the Send Function] ➞ [Allow Fax Driver TX].
2
Select [On] or [Off] ➞ press [OK].
Details of each item are shown below.
[On]: Faxes can be sent using the fax driver.
[Off]: Faxes cannot be sent using the fax driver.
(Additional Functions) ➞ [System Manager Settings]
(Additional Functions) ➞ [System Settings] ➞
Restricting Send Function
11
11-17