Canon Color imageRUNNER C2880i Sending And Facsimile Manual page 366

11
11-46
LDAP Server Settings
● If [Use] is selected:
❑
Specify each setting ➞ press [OK].
[User]:
Press [User] ➞ enter a user name ➞ press [OK].
Enter the user name according to the type of LDAP server you are using.
•
If you are using Windows 2000 Server with Active Directory:
Press [User] ➞ enter "Windows domain name/Windows user name".
Example: If <team1> is the Windows domain name, and <user1> is the
Windows user name:
team1/user1
•
If you are using Novell NetWare 5.1 (NDS) or later:
Press [User] ➞ add the corresponding object class "o=", "ou=", or "c=" to
each dot-separated series of characters that configure the distinguished
name, and separate each series of characters by a comma.
Example: If <user1.TEAM1.SALESDEPT.CANON> is the distinguished name
in NDS:
cn=user1, ou=team1, ou=salesdept, o=canon
•
If you are using Lotus Notes Domino R5 or later:
Press [User] ➞ enter the dn (Distinguished Name) of the user, such as
"cn=admin", "ou=team1", or "ou=salesdept".
[Password]:
Press [Password] ➞ enter a password ➞ press [OK].
Press [Confirm] ➞ re-enter the password for confirmation ➞ press [OK] ➞
[OK].
After pressing [OK], the password that you entered appears as asterisks
(********) on the Register screen.
<Display authentication dialog when searching>:
[On]: When searching for information on the server, a login information dialog
box is displayed even if a password is not required.
[Off]: When searching for information on the server, a login information dialog
box is not displayed.
<Server LDAP version and character code>:
Select the LDAP version and character code according to the LDAP server's
environment.