Canon Color imageRUNNER C2880i Sending And Facsimile Manual page 345

5
Enter a name for the forwarding condition ➞ press [OK].
NOTE
If [Send Doc. Name] is not specified, the first 24 characters of the condition name
are also stored as the document's name. However, you can change the document's
name at any time.
6
Press [Forwarding Conditions].
7
Press the Receive Type drop-down list ➞ select [Fax] or
[I-Fax].
If the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is not
installed, this step is not necessary. If the optional Super G3 Multi-Line Fax Board
is installed, you can select the line ([Fax: Line 1], [Fax: Line 2], or [Fax: Line
Shared]).
11-25
Forwarding Settings
11