Canon Color imageRUNNER C2880i Sending And Facsimile Manual page 394

Check the user name and password or check settings.
Cause 1
Remedy
Cause 2
Remedy
Cannot complete searching due to timeout. Check the settings.
Cause
Remedy
The number of search results has exceeded limits. Change search conditions and try again.
Cause
Remedy 1 Narrow down the search criteria, and then search again.
Remedy 2 Increase the maximum number of addresses to search. (See "Registering an
13
13-12
Error Messages
When setting Login Information for the LDAP server to 'Use' or 'Use (security
auth.)', the user name or password is incorrect.
Check the User Name and Password settings when <Login Information> in
Register LDAP Server in System Settings (from the Additional Functions
screen) is set to 'Use' or 'Use (security auth.)'. (See "Registering an LDAP
Server," on p. 11-43.)
When setting Login Information for the LDAP server to 'Use (security auth.)', the
domain name is incorrect.
Check the Domain Name setting when <Login Information> in Register LDAP
Server in System Settings (from the Additional Functions screen) is set to 'Use
(security auth.)'. (See "Registering an LDAP Server," on p. 11-43.)
The search could not be completed within the time specified under <Search
Timeout>.
Increase the time setting for Search Timeout in Register LDAP Server in
System Settings (from the Additional Functions screen). (See "Registering an
LDAP Server," on p. 11-43.)
The number of addresses that meet the search criteria exceeds the specified
maximum number of addresses to search.
LDAP Server," on p. 11-43.)