Handling And Storing Srx5400, Srx5600, And Srx5800 Services Gateway; Cards; Srx5400, Srx5600, And Srx5800 Services Gateway Card; Terminology - Juniper SRX5400 Manual

Services gateway card reference

Hide thumbs Also See for SRX5400:

Table of Contents

SRX5400, SRX5600, and SRX5800 Services Gateway Card Reference

Handling and Storing SRX5400, SRX5600, and SRX5800 Services Gateway Cards

SRX5400, SRX5600, and SRX5800 Services Gateway Card Terminology

Documentation

SRX5400, SRX5600, and SRX5800 Services Gateway Card Terminology on page 44

Handling an SRX5400, SRX5600, or SRX5800 Services Gateway Card on page 45

Storing an SRX5600, SRX5600, or SRX5800 Services Gateway Card on page 47

Regardless of orientation, this information uses the same terms for all four edges of the

card (see

Figure 33 on page

Faceplate—Edge of the card that has connectors to which you connect cables or

sockets in which you insert SFP or XFP transceivers.

Connector edge—Edge opposite the faceplate; this edge has the connectors that attach

to the midplane.

Top edge—Edge at the top of the card when it is vertical.

Bottom edge—Edge at the bottom of the card when it is vertical.

NOTE:

This terminology applies to SPCs, IOCs, MPCs, and SCBs in addition

to Routing Engines and port modules.

Figure 33: Card Edges

Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 4

44):

Table of Contents

Srx5600 Srx5800