Display
Function
Automatic switch-off of the cooking
zones
Switched off.
-
Time until automatic switch-off.
Duration of the timer end signal tone
10 seconds.
30 seconds.
1 minute.
The power limitation function limits the
total power of the hob
. The available settings depend on the
maximum power of the hob.
Deactivated. The hob's total power out-
put is limited.
1000 W minimum power
. 1500 W
...
3000 W is recommended for 13 A.
. 3500 W is recommended for 16 A.
4000 W
. 4500 W is recommended for 20 A.
...
or . The hob's total power output is lim-
ited.
Time for selecting the cooking zone
Unlimited: The cooking zone that was
last set remains selected.
Limited: The cooking zone only remains
selected for a few seconds.
Cookware test, result
Not suitable.
Not optimal.
Suitable.
Automatic management with power limit-
ation
Deactivated: Shows the power limitation
according to the power management
1
function.
Activated: Does not show the power limit-
ation of the power management function.
Restoring factory settings
Individual settings.
Factory settings.
1
Factory setting
17.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
18 Energy consumption display
This function indicates the total amount of energy con-
sumed between switching the hob on and switching it
off again.
Once switched off, the energy consumption is dis-
played in kilowatt hours, e.g. 1.08 kWh, for
10 seconds.
1
1
1
1
1
.
Energy consumption display en
Within the next 10 seconds, touch and hold
2.
four seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. To call up the individual displays, touch the
control panel.
Touch
to access the basic settings.
3.
and , along with , light up alternately as a pre-
a
setting.
Touch
repeatedly until the required function is dis-
4.
played.
Select the required setting in the settings range.
5.
Touch and hold
for four seconds.
6.
a The settings are saved.
17.3 Exiting the basic settings
Touch
to switch off the hob.
▶
The accuracy of the display depends on various factors
such as the voltage quality of the power supply.
The display can be activated in the basic settings.
→ Page 22
for
Display
.
.
23