Table of Contents
Advertisement
a The
display lights up in the cooking zone.
lights up in the timer display.
a
3.
Within the next 10 seconds, set the required cook-
ing time in the settings range.
To set a cooking time of less than 10 minutes,
‒
always touch 0 before you select the required
value.
a The time starts to elapse.
Notes
¡ To view the remaining cooking time, select the cor-
responding cooking zone.
¡ If you have set a cooking time for several cooking
zones, the time information for each of the selected
cooking zones always appears in the timer display.
¡ If you select the CombiZone function for the com-
bined cooking zone, the set time for both cooking
zones is the same.
Changing or deleting the cooking time
Select the cooking zone and then touch
1.
To delete the time, change the cooking time in the
2.
settings range or set to
Once the cooking time has elapsed
The cooking zone switches itself off. An audible signal
sounds and the
appears in the timer display for
10 seconds.
13 PowerBoost
The PowerBoost function enables you to heat up large
quantities of water faster than when using power
level .
You can then activate this function for a cooking zone,
provided no other cooking zone in the same group is
in use (see illustration). Otherwise
power level display.
Note: In the combi zone, you can only activate the
PowerBoost function if you are using the two cooking
zones as two independent cooking zones.
13.1 Activating the PowerBoost function
Requirement: In the combi zone, the PowerBoost func-
tion can only be activated if you are using the two
cooking zones independently of each other.
Select the cooking zone.
1.
.
.
and
flash in the
Touch
.
▶
a The displays go out and the audible signal stops.
12.2 Automatically programming the
cooking time
You can automatically set the same cooking time for all
cooking zones. The set time for each of the cooking
zones counts down independently of the others.
You can find more information about this at
→ "Basic settings", Page 22.
12.3 Short-term timer
You can use the short-term timer to set a time of up to
99 minutes. This function operates independently of the
cooking zones and other settings. This function does
not automatically switch off a cooking zone.
Setting the short-term timer
Touch
repeatedly until the
1.
lights up in the timer display.
a
2.
Set the desired time in the settings range.
a After a few seconds, the time begins to elapse.
Changing or deleting the timer duration
Touch
repeatedly until the
1.
In the settings range, change the time or set to
2.
to delete the time.
Once the timer duration has elapsed
A signal sounds.
appears in the timer display and
the display lights up. The displays go out after
10 seconds.
Touch
.
▶
a The displays go out and the audible signal stops.
Select power level and then touch
2.
play lights up.
a The function has been activated.
Note: If you switch on a cooking zone while the Power-
Boost function is active,
level display; power level
ally. The PowerBoost function is deactivated.
13.2 Deactivating the PowerBoost function
Select the cooking zone.
1.
Touch
. The display goes out and the cooking
2.
zone switches back to the
a The function has now been deactivated.
Note: In certain circumstances, the PowerBoost func-
tion is automatically switched off in order to protect the
electronic elements inside the hob.
PowerBoost en
display lights up.
display lights up.
. The
and
flash in the power
is then applied automatic-
power level.
dis-
21
Advertisement
Table of Contents
