14: Lan Control; 15: Usb Memory - Roland V-60HD Reference Manual

Menu item
ZOOM
ZOOM POSITION
FOCUS
AUTO FOCUS
FOCUS GUIDE
EXPOSURE
ND
IRIS
SHUTTER
GAIN
AE SHIFT
(*20) The values depend on the camera you're using.

14: LAN CONTROL

Menu item Value
(bold text: default value)
CONFIGURE
MANUALLY,
192 168 2 254
IP ADDRESS
255 255 255 0
SUBNET MASK
INFORMATION (ENTER)
(*21) This is available when "CONFIGURE" is set to "MANUALLY. "

15: USB MEMORY

Menu item Value
(bold text: default value)
LOAD PRESET (ENTER)
SAVE PRESET (ENTER)
SAVE AS PRESET (ENTER)
STILL IMAGE 1
LOAD STILL IMAGE
STILL IMAGE 2
FORMAT (EXEC)
Value Explanation
(bold text: default value)
This adjusts the camera's zoom position. When the cursor is located at this value, you can control the camera.
WIDE While you hold down the [VALUE] button, the camera zooms-out.
TELE While you hold down the [VALUE] button, the camera zooms-in.
1–6 Adjusts the zoom position in the six levels of 1 (WIDE)–6 (TELE).
This adjusts the focal point of the camera. When the cursor is located at this value, you can control the camera.
FAR While you hold down the [VALUE] button, the focal point moves farther away.
NEAR While you hold down the [VALUE] button, the focus moves closer.
OFF, ON When this is set to "ON, " the focal point is set automatically.
OFF, ON If this is "ON, " a focus guide is shown.
AUTO, Tv, Av, MANUAL This sets the exposure mode.
(*20) This specifies the type of ND filter.
(*20) This adjusts the aperture value.
(*20) This adjusts the shutter speed.
(*20) This adjusts the gain.
(*20) This adjusts the amount of exposure compensation when using auto exposure.
Explanation
This sets whether the IP address and subnet mask are obtained automatically (USING DHCP) or set
USING DHCP
manually (MANUALLY).
(*21) This sets the IP address.
(*21) This sets the subnet mask.
The LAN INFORMATION screen appears.
Indication
STATUS
IP ADDRESS
SUBNET MASK
MAC ADDRESS
(QR code)
Explanation
The USB LOAD screen appears.
This loads a settings file (.V06) that is on the USB flash drive into the unit.
The USB SAVE screen appears.
This saves settings, overwriting the selected settings file (.V06) on the USB flash drive.
The USB SAVE AS screen appears.
This newly saves the unit's settings to the USB flash drive as a single file (.V06).
* Any still images that have been imported into the unit are not saved in the file.
When you are importing a still image that is on a USB flash drive, this specifies the memory to use as
the destination for saving the image on the unit.
Pressing the [VALUE] knob lets you import the still image.
* A " " symbol is displayed for memory where a still image is already saved.
File format of the still images that can be loaded
Format
Resolution Maximum 1920 x 1200 pixels
File name
This formats the USB flash drive.
Explanation
This displays the connection status.
This displays the IP address.
This displays the subnet mask.
This displays the MAC address.
This displays the URL of the IP address as a QR code.
Bitmap file (.bmp), 24-bit color,
uncompressed
Up to eight single-byte alphanumeric
characters
* The extension ".bmp" must be added.
PNG File (.png)
* PNGα channel is not supported.
Maximum 1920 x 1200 pixels
Up to eight single-byte alphanumeric
characters
* The extension ".png" must be added.
Menu List
13