Midi Control Modes Of The V-1Hd; Setup Menu - Roland V-1HD Manual

MIDI Control Modes of the V-1HD

The V-1HD supports remote control via an external MIDI device. MIDI remote control for the V-1HD comprises the following three modes.
MEMO
You can also operate the V-1HD to send MIDI messages to an external MIDI device. The output MIDI messages are shared by the three modes.
Standard Mode
This is the MIDI remote-control mode specific to the V-1HD. You use it when remotely operating the V-1HD from a keyboard or other external MIDI
device.
MIDI Visual Control (MVC) Mode
This is the mode for remote controlling the V-1HD from an external MVC (MIDI Visual Control) device.
MIDI Visual Control (MVC) is a new world-wide standard of MIDI. It aims to link music and video during live performances. By connecting the two
devices via MIDI, you can remotely control the V-1HD with an electronic musical instrument in time to the music or audio. The V-1HD switches to MVC
mode when it receives an MVC "On" command from a MIDI device.
V-LINK Mode
This is the mode for remote controlling V-1HD from an external V-LINK device.
V-LINK is a Roland original feature to link music and visual performances. You can remotely control the V-1HD via a MIDI connection from another
V-LINK enabled Roland product.
The V-1HD can turn on its V-LINK mode when it receives a V-LINK "On" command from another Roland V-LINK enabled product.

SETUP Menu

Detailed settings for MIDI remote control are made via the SETUP menu on the V-1HD. Press the [MENU] button to display the MIDI menu.
Setting item Value
MIDI Rx SOURCE USB, MIDI IN
MIDI OUT THRU, OUT
MIDI Tx CHANNEL
1–16
MIDI DEVICE ID
1 (00h)–32 (1Fh)
MIDI Rx CHANNEL 1–16, OFF
MIDI Rx TEMPO CLOCK ON, OFF
2
Explanation
This sets the connector for receiving MIDI messages.
This sets the operation of the MIDI OUT/THRU connector.
• OUT:
MIDI messages are sent from the V-1HD.
• THRU:
Received MIDI messages are sent unchanged. The V-1HD sends
no MIDI messages itself.
This sets the Tx channel for sending MIDI messages from the V-1HD..
This sets the device ID to receive/send the system exclusive messages.
* This also doubles as the device ID in the MIDI Visual Control (MVC) mode and V-LINK mode.
This sets the Rx channel of MIDI messages. If this is "OFF", the channel voice messages of standard mode will not be received.
Setting this to "ON" makes the unit receive a MIDI tempo clock for BPM sync.
MIDI Rx SOURCE
MIDI IN V-1HD
USB MIDI
MIDI OUT
MIDI OUT
USB MIDI