15: Lan Control - Roland XS-62S Reference Manual

Menu item
When PROTOCOL = Canon
SD CARD SLOT (*27)
REC STATUS
REMAIN TIME
WHITE BALANCE (*27)
WB TEMPERATURE (*27) (*28)
(*29)
WB PRESET SET
ZOOM (*30)
ZOOM POSITION (*27)
FOCUS (*30) (*31)
AUTO FOCUS (*27)
(*27)
FOCUS GUIDE
EXPOSURE (*27)
ND
IRIS
SHUTTER
GAIN
AE SHIFT
(*27) The default value depends on the settings of the camera that you're using.
(*28) This is available when "WHITE BALANCE" is set to "COLOR TEMPERATURE. "
(*29) This is available when "WHITE BALANCE" is set to "PRESET 1" or "PRESET 2. "
(*30) This is not initialized by factory reset.
(*31) This is available when "AUTO FOCUS" is set to "OFF. "
(*32) The values depend on the camera you're using.

15: LAN CONTROL

Menu item
CONFIGURE
IP ADDRESS (*33)
SUBNET MASK (*33)
INFORMATION
(*33) This is available when "CONFIGURE" is set to "MANUALLY. "
(*34) QR Code is registered trademark of DENSO WAVE INCORPORATED in Japan and in other countries.
Value Explanation
(bold text: default value)
SD CARD A, SD CARD B This specifies the SD card slot to use.
— This indicates the video recording status.
— This indicates the remaining available recording time.
AWB, DAYLIGHT,
TUNGSTEN, PRESET 1, This specifies the white balance type.
PRESET 2, COLOR TEMP
2000–15000K This specifies the color temperature.
When you press the [VALUE] knob, the subject shown by the camera is captured as the
(EXEC)
reference white color.
This adjusts the camera's zoom position. When the cursor is located at this value, you can control the camera.
WIDE While you hold down the [VALUE] knob, the camera zooms-out.
TELE While you hold down the [VALUE] knob, the camera zooms-in.
1–6 Adjusts the zoom position in the six levels of 1 (WIDE)–6 (TELE).
This adjusts the focal point of the camera. When the cursor is located at this value, you can control the camera.
FAR While you hold down the [VALUE] knob, the focal point moves farther away.
NEAR While you hold down the [VALUE] knob, the focus moves closer.
OFF, ON When this is set to "ON, " the focal point is set automatically.
OFF, ON If this is "ON, " a focus guide is shown.
AUTO, Tv, Av, MANUAL This sets the exposure mode.
This specifies the type of ND filter.
(*32)
This adjusts the aperture value.
(*32)
This adjusts the shutter speed.
(*32)
This adjusts the gain.
(*32)
This adjusts the amount of exposure compensation when using auto exposure.
(*32)
Value
(bold text: default value)
USING DHCP
MANUALLY,
192 .168 .2 .254
255 .255 .255 .0
(ENTER)
Explanation
This sets whether the IP address and subnet mask are obtained automatically
(USING DHCP) or set manually (MANUALLY).
This sets the IP address.
This sets the subnet mask.
The LAN INFORMATION screen appears.
Indication Explanation
STATUS This displays the connection status.
IP ADDRESS This displays the IP address.
SUBNET MASK
This displays the subnet mask.
MAC ADDRESS This displays the MAC address.
(QR code) (*34) This displays the URL of the IP address as a QR code.
Menu List
17