Device Setup - ZyXEL Communications NBG7815 User Manual

Note: This is not available if you are using bridge mode.

8.2.1 Device Setup

Use this screen to enable parental control, view the parental control rules and schedules.
Click Parental Control > Device to show the following screen.
Figure 22 Parental Control > Device
The following table describes the fields in this screen.
Table 12 Parental Control > Device
LABEL
Sort By
Connect to
No.
Type
Network
Name
MAC
IP Address
Profile
Action
8.2.1.1 Edit Device Detail
Use this screen to configure basic settings for the client device. Click the Action icon
Edit icon (
Chapter 8 Applications
DESCRIPTION
Choose to sort the order of your client devices by Type or Name.
Choose whether you want to show client devices that are connected to Main
Network or client devices that are connected to Guest Network.
Choose All if you want to show all client devices.
This shows the index number of the rule.
The shows the type of client device to which this rule applies.
This shows the type of network the client devices are connected to.
This shows the name of the user to which this rule applies.
This field shows the MAC address of the client device with the name in the Name
field.
Every Ethernet device has a unique MAC (Media Access Control) address which
uniquely identifies a client device. The MAC address is assigned at the factory and
consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
This field displays the IP address relative to the No. field listed above.
This shows the name of the rule that is applied to the client device.
If no rule exists, unassigned is showed in this field.
Click the Action icon (
) to show the following screen.
NBG7815 User's Guide
) to configure a rule for the client device.
64
, and then the
( )