4.4 Enable or Disable a Guest WiFi Network
After the NBG7815 is set up, you can use separate WiFi networks for your clients. The WiFi settings will be
applied to all clients in the same network.
Note: This is not available if you are using bridge mode.
Click the Navigation Panel icon on the top-left corner (
1
Enable the guest WiFi and enter the WiFi Name (SSID) and WiFi Password. Select the Security Mode. Click
2
APPLY to save your changes.
Chapter 4 Tutorials
NBG7815 User's Guide
38
), and click Settings to open the WiFi screen.