Hardware Installation and
This chapter describes the front panel LED and rear panel of the NBG7815 and shows you how to mount
the NBG7815 on the desk or wall.
2.1 Rear Panel
The following figure show the rear panel of the NBG7815. The rear panel contains:
Figure 9 Rear Panel
The following table describes the items on the rear panel.
Table 3 Rear Panel Ports
LABEL
Power
USB
2.5G/1G
10G/Multi-Gig Connect Multi-Gigabit Ethernet devices to the Ethernet port for high speed Internet access.
LAN1 – LAN4
Reset
2.2 Front Panel LED
After you connect the power to the NBG7815, view the LEDs to ensure proper functioning of the
NBG7815 and as an aid to troubleshooting.
DESCRIPTION
Connect the power adapter to start the NBG7815.
The USB port is used for file-sharing and media server.
Connect an Ethernet cable to the Ethernet WAN port for Internet access.
Connect computers or other Ethernet devices to Ethernet ports for Internet access.
Press the button for longer than 8 seconds to return the NBG7815 to the factory defaults.
NBG7815 User's Guide
C
H A P T E R
Connection
20
2