Samba Server - ZyXEL Communications NBG7815 User Manual

8.4.1 SAMBA Server

Use this screen to set up file-sharing through the NBG7815 using File Explorer or the workgroup name. You
can also configure the workgroup name and create file-sharing user accounts.
Click USB Application > SAMBA to show the following screen.
Figure 33 USB Application > SAMBA
The following table describes the labels in this screen.
Table 21 USB Application > SAMBA
LABEL
SAMBA Setup
Enable SAMBA
Name
Work Group
Description
Require username
and password
User Accounts
Chapter 8 Applications
DESCRIPTION
Select this to enable file sharing through the NBG7815 using File Explorer or by browsing to
your work group.
Specify the name to identify the NBG7815 in a work group.
You can add the NBG7815 to an existing or a new work group on your network. Enter the
name of the work group which your NBG7815 automatically joins. You can set the
NBG7815's work group name to be exactly the same as the work group name to which your
computer belongs to.
Note: The NBG7815 will not be able to join the work group if your local area
network has restrictions set up that do not allow devices to join a work
group. In this case, contact your network administrator.
Enter the description of the NBG7815 in a work group.
Select Yes to need a user account for access to the connected USB stick from any
computer. Otherwise, select No.
Before you can share files you need a user account. Configure the following fields to set up
a file sharing account.
NBG7815 User's Guide
73