ZyXEL Communications NBG7815 User Manual page 116

Figure 62 Settings > WiFi > WPS
The following table describes the labels in this screen.
Table 40 Settings > WiFi > WPS
LABEL DESCRIPTION
WPS
WiFi WPS Status Select Enable to turn on the WPS feature. Otherwise, select Disable.
Push Button Use this button when you use the PBC (Push Button Configuration) method.
Click this to start WPS-aware WiFi station scanning and WiFi security information
synchronization.
WPS Status
Status This displays Configured when a WiFi station has connected to the NBG7815 using WPS and
WiFi setup or security settings have been changed from default. The current WiFi setup and
security settings also appear in this screen.
This displays Unconfigured if WPS is disabled and there are no WiFi setup or security changes
on the NBG7815 or if you click Release Configuration to restore WiFi setup and security
settings to default.
802.11 Mode This is the 802.11 mode used. Only compliant WiFi devices can associate with the NBG7815.
SSID This is the name of the WiFi network (the NBG7815's first SSID) that WPS clients connect to.
Security This is the type of WiFi security employed by the network.
APPLY Click APPLY to save your changes back to the NBG7815.
CANCEL Click CANCEL to reload the previous configuration for this screen.
Chapter 10 Wireless LAN
NBG7815 User's Guide
116