Bridge Mode Status Screen - ZyXEL Communications WSR30 User Manual

6.9 Bridge Mode Status Screen

Click Settings > System > Status to open the status screen.
Figure 44 Settings > System > Status (Bridge Mode)
The following table describes the labels shown on the Status screen.
Table 11 Settings > System > Status (Bridge Mode)
LABEL
System
Model Name
Firmware Version
System Operation Mode
Enable IPv4 Firewall
Enable IPv6 Simple Security
System Uptime
LAN Information
MAC Address
IP Address
IP Subnet Mask
DHCP Server
IPv6 Address
Chapter 6 Multy M1 Modes
DESCRIPTION
This is the model name of your device.
This is the firmware version.
This is the device mode to which the Multy M1 is set, see
for more information.
This shows if the IPv4 firewall is enabled on the Multy M1.
This shows if the IPv6 firewall is enabled on the Multy M1.
This is the total time the Multy M1 has been on.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Enable or Disable.
This shows the current IPv6 address of the Multy M1 in the LAN.
Multy WiFi System User's Guide
131
Section 7.11 on page 150