Bridge Mode Status Screen - ZyXEL Communications ARMOR G1 NBG6818 User Manual

6.4 Bridg e Mo de Sta tus Sc re e n
Click
Se tting s
Settings > System > Status (Bridge Mode)
Fig ure 19
The following table describes the labels shown in the
Table 6 Settings > System > Status (Bridge Mode)
L ABEL
System
Model Name
Firmware Version
System Operation Mode
Enable IPv4 Firewall
Enable IPv6 Simple Security
System Uptime
LAN Information
MAC Address
IP Address
IP Subnet Mask
DHCP Server
IPv6 Address
Chapter 6 Bridge Mode
> > to open the status screen.
Syste m Sta tus
DESC RIPT IO N
This is the model name of your device.
This is the firmware version.
This is the device mode to which the NBG6818 is set, see
for more information.
This shows if the IPv4 firewall is enabled on the NBG6818.
This shows if the IPv6 firewall is enabled on the NB6818.
This is the total time the NBG6818 has been on.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role -
This shows the current IPv6 address of the NBG6818 in the LAN.
NBG6818 User's Guide
screen.
Sta tus
Ena b le
41
Section 13.7 on page 137
or .
Disa b le