ZyXEL Communications NBG7815 User Manual page 19

You can use the WPS button in the Web Configurator of the NBG7815 to activate WPS in order to quickly
set up a WiFi network with strong security.
Make sure the power LED is on (not blinking).
1
Open the Web Configurator.
2
Click Settings > WiFi > WPS, and then press the WPS button.
3
Press the WPS button on another WPS-enabled device within range of the NBG7815. See the User's
4
Guide of the other device for details.
Note: You must activate WPS in the NBG7815 and in another WiFi device within 2 minutes of
each other.
See the Wireless LAN chapter in the User's Guide for information on using WPS.
Chapter 1 Introduction
NBG7815 User's Guide
19