ZyXEL Communications NBG7815 User Manual page 68

Note: You have to enable DDNS in Settings > Internet > Dynamic DNS screen before you can
create an OpenVPN account. See
Dynamic DNS.
Figure 27 OpenVPN Server
The following table describes the fields in this screen.
Table 16 OpenVPN Server
LABEL
OpenVPN Server
Dynamic DNS
Host Name
Configuration
Status
Protocol
Server Port
VPN Subnet / Netmask
Advertise DNS to Clients
Chapter 8 Applications
Section 9.8 on page 101
DESCRIPTION
This field shows the status of your Dynamic DNS. Make sure it shows Enable before
you create an OpenVPN account.
This field shows the Host Name of your Dynamic DNS account.
Select Enable to activate your OpenVPN Server account.
Select the protocol you want to apply to your OpenVPN Server account.
The default server port number is 1194. You can change it if needed. However,
clients connected to this OpenVPN Server account will have to use the same port
number in order to access the server account.
The fields define the network from which OpenVPN clients can connect to the
NBG7815 OpenVPN server.
Enter an IPv4 address and subnet mask.
Select Enable if you want the NBG7815 to broadcast its OpenVPN server to
OpenVPN clients in its VPN network defined previously.
NBG7815 User's Guide
68
for more information on