Navigating Through The Setup Utility; Navigating Through The Setup Utility - Fujitsu 985Tx User Manual

NAVIGATING THROUGH
THE SETUP UTILITY
The BIOS setup utility consists of six menus;
MAIN,ADVANCED, SECURITY, POWER
SAVINGS, BOOT and EXIT. The remainder
of Section Three explains each menu in turn
including all submenus and setup items.
The following procedures allow you to navigate
the setup utility menus:
1. To select a menu,use the cursor keys:
2. To select a field within a menu or a submenu,
use the cursor keys: , .
3. To select the different values for each field,
press the Spacebar or + to change to the next
higher selection and F5 or – to go to the next
lower selection.
4. To activate a submenu press the Enter key.
5. To return to a menu from a submenu, press
the Esc key.
6. To go to the Exit Menu from any other menu,
press the Esc key.
C o n f i g u r i n g Y o u r L i f e B o o k 9 0 0 S e r i e s
P O I N T
Selecting a field causes a help message
about that field to be displayed on the
right-hand side of the screen.
P O I N T
Pressing the Enter key with the highlight
on a selection that is not a submenu or
, .
auto selection will cause a list of all
options for that item to be displayed.
Pressing the Esc key or the Enter key
will select the highlighted choice and
remove the list.
L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u
7. Pressing the F9 key resets all items in the
current menu to the default values.
8. Pressing the F10 key resets all items in the
current menu to the value which was se t
when the setup utility parameters were
last saved.
9. Pressing the F1 key will give you a general
help screen.
55