Fujitsu 985Tx User Manual page 112

C A U T I O N
The floppy disk drive must be installed or
removed with the power off.
Port Cover
Connector
Release Buttons
External Floppy
Disk Drive
Figure 4-6 External Installation of a Floppy Disk Drive
U s e r I n s t a l l a b l e
To install a floppy disk drive externally, you must
purchase an optional external floppy disk drive.
To Connect An Optional
External Floppy Disk Drive:
1. Close all files and exit all applications.
2. Turn off power to your notebook, close
the display and remove the AC adapter.
(See pages 24–25 for more information.)
3. Open the external floppy disk drive port
cover on the left side panel of your notebook
(Figure 4-6), by gently pulling on the front
edge of the cover and swinging it toward the
back of your notebook.
4. Align the external floppy disk drive cable
with the smaller connector towards the body
of your notebook with the wide side of the
connector down. (Figure 4-6.)
5. Insert the connector firmly into the port on
your notebook until it clicks.
6. Insert the other cable connector into the
back of the external floppy disk drive and
External Floppy
Disk Drive Port
press firmly until it clicks.
L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u
F e a t u r e s
To Disconnect An Optional
External Floppy Disk Drive:
1. Close all files and exit all applications
2. Turn off power to your notebook, close
the display and remove the AC adapter
(See pages 24–25 for more information.)
3. Squeeze the releases on the sides of the
external floppy disk drive cable connector
together. (The connector is next to the b ody
of your notebook.) (Figure 4-6.)
4. Pull the cable free.
5. Close the external floppy disk drive port
cover on your notebook by swinging it
toward the front of your notebook and
pressing it into the side of your notebook
until it latches.
6. Squeeze the releases, on the sides of the
external floppy disk drive cable connector
next to the body of your external floppy disk
drive, together.
7. Pull the cable free.
103