Midi/Joystick Devices; Midi/Joystick Devices - Fujitsu 985Tx User Manual

S e c t i o n F o u r
P O I N T
The main battery should only be
removed for storage or service.
To Remove or Install a Battery
in the Battery Bay:
1. Close all files and exit all applications.
2. Turn off power to your notebook, close
the display and remove the AC adapter.
(See pages 24–25 for more information.)
3. Turn your notebook upside down with the
bay openings toward you.
To Remove a Battery from the Battery Bay:
4. Slide the battery release button on the bot-
tom right side of the battery bay to your
right. (Figure 4-12.)
5. Slide the battery forward until it is clear of
the compartment. This will require some
force. Use the finger ridge on the bottom
of the battery.
110
To Install a Battery in the Battery Bay:
4.Orient the battery to be installed with the
finger ridge away from the body of your
notebook and the connector toward the
body of your notebook.
5. Align the grooves on the side of the battery
with the tracks in the side of the bay.
(Figure 4-12.)
6. Slide the battery toward the back of your
notebook until it clicks into place. Make
sure that the battery release button has
returned to its base position against the
side of the battery.

MIDI/JOYSTICK DEVICES

To connect a MIDI/Joystick Device:
1. Close all files and exit all applications.
2. Turn off power to your notebook, close
the display and remove the AC adapter.
(See pages 24–25 for more information.)
3. Open the MIDI port cover on the right sid e
panel of your notebook, (Figure 4-13), by
Connector to
Connector
Locking Screws
Joystick
Port Cover
Connector Release Buttons
Figure 4-13 Installing a MIDI/joystick Device