Fujitsu CELSIUS H7510 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. CELSIUS H7510
  6. Operating manual

Fujitsu CELSIUS H7510 Operating Manual

Hide thumbs Also See for CELSIUS H7510:
Table of Contents

Advertisement

Quick Links

System
Operating Manual
FUJITSU CELSIUS H7510

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu CELSIUS H7510

Summary of Contents for Fujitsu CELSIUS H7510

  • Page 1 System Operating Manual FUJITSU CELSIUS H7510...
  • Page 2 Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Issued by / EU importer Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Client Computing Limited2020. All rights reserved. Publication Date 12/2020 Edition 1...
  • Page 5 FUJITSU CELSIUS H7510 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

  • Page 7: Table Of Contents

    Wireless components Wireless LAN / Bluetooth / LTE (optional) ......40 Fujitsu...
  • Page 8 ............66 Fujitsu...
  • Page 9 Index ................. . 80 Fujitsu...
  • Page 10 Contents Fujitsu...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 13: Ports And Controls

    7 = Fingerprint sensor (optional) or palm vein sensor (optional) 2 = Webcam 8 = Touchpad keys 3 = Webcam LED 9 = Status indicators 4 = Status indicators 10 = Touchpad 5 = ON/OFF button 11 = TouchStick (optional) 6 = Loudspeakers Fujitsu...
  • Page 14 8 = Memory card slot (SD) 4 = HDMI port 5 = USB 3.2 Gen1 port with charging function (USB Type-A) Right side 1 = Combined headphone and 3 = DC socket (DC IN) microphone port 2 = USB Port 3.2 Gen2 (USB Type-A) Fujitsu...
  • Page 15 1 = Battery (SIM card under the battery) 5 = Hard disk service compartment (1 x HDD and 1 x M.2 module) 2 = Battery release 2 6 = Memory service compartment 3 = Opening for battery removal 4 = Battery release 1 Fujitsu...

  • Page 16: Important Notes

    If you have questions about using your notebook in a particular area, please contact your sales outlet or our Hotline/Service Desk. Opening angle of the LCD screen Please open the LCD screen carefully until you feel resistance. Do not try to open it further with force! Fujitsu...

  • Page 17: Additional Safety Notes For Devices With Radio Components

    You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment. Energy saving under Windows ► Make use of the power management features (see ""Using the power-management features", Page 35"). Fujitsu...

  • Page 18: Travelling With Your Notebook

    ► Unplug the mains adapter and all external devices from the power socket. ► Disconnect the mains adapter cable and the data cables for all external devices. ► Close the LCD screen. ► To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook. Fujitsu...

  • Page 19: Cleaning The Notebook

    The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. You can use disinfectant wipes to clean the keyboard and the touchpad. Ensure that no liquid enters the device. Fujitsu...

  • Page 20: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...

  • Page 21: Selecting A Location

    ► Connect the power cable (1) to the power adapter provided for the device, see chapter "Technical data", Page ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 22: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".

  • Page 23: Working With The Notebook

    Please refer to the notes in "Important notes", Page Status indicators Statusindicators The status indicators provide information about the status of the power supply, the drives and the keyboard functions. Fujitsu...
  • Page 24 Indicator is illuminated: The Caps Lock key has been pressed. All the characters you type will appear in upper case. In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. Fujitsu...
  • Page 25 The indicator lights up: The key combination was pressed. Instead of the imprinted standard functions of the function keys, the Fn functions can be executed by pressing the keys directly (see chapter "Function keys and key combinations", Page 25). Fujitsu...

  • Page 26: Switching On The Notebook

    Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook does not switch itself off automatically, press the ON/OFF button for about five seconds. ► Close the LCD screen. Fujitsu...

  • Page 27: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
  • Page 28 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor control Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...

  • Page 29: Separate Number Block

    This function key switches the microphone off and on. Enable Disable Switching the loudspeakers on and off Use this function key to switch your notebook’s loudspeakers off and on. Loudspeakers Loudspeakers Decrease volume This function key reduces the volume of the built-in loudspeakers. Volume Fujitsu...
  • Page 30 This function key takes a screenshot of the current screen display and saves it to the clipboard. Num Lock This function key activates the virtual number block. The characters found on the upper right of the keys are then output. Fujitsu...

  • Page 31: Keyboard With Background Lighting (Optional)

    In battery mode, it is recommended to turn on the backlight only when needed and to use the lower brightness level to maximize battery life. Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Fujitsu...

  • Page 32: Touchpad And Touchpad Buttons

    TouchStick. The pointer will move. Selecting an item ► Move the pointer to the item you wish to select. Touchpad ► Tap the touchpad once or press the left-hand TouchStick/touchpad button once. The item is selected. Fujitsu...

  • Page 33: Executing Commands

    ► Select the desired object and hold down the left TouchStick/touchpad button. ► Drag the object to the desired position. ► Lift your finger from the touchpad. ► Lift your finger from the TouchStick. The item will be moved. Fujitsu...

  • Page 34: Lcd Screen

    LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a particular resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear image.

  • Page 35: Webcam

    LCD screen may flicker while the light level is adjusted. Further information on using the webcam and on the additional settings which are possible for your webcam can be found in the help function of the program which uses the webcam. Fujitsu...

  • Page 36: Rechargeable Battery

    To be able to make use of the optimal charging capacity of the batteries, the battery should be completely discharged and then fully recharged. If you do not intend to use a battery for long periods of time, remove it from the notebook. Never store a battery in the device. Fujitsu...

  • Page 37: Removing And Installing The Battery

    Working with the notebook Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections. Never store a battery for long periods in the discharged state. This can make it impossible to recharge.
  • Page 38 ► Insert the battery in the battery compartment (1). ► Push the battery release mechanism 2 in the direction of the arrow (2). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the previously disconnected cables. Fujitsu...

  • Page 39: Using The Power-Management Features

    If you operate the notebook in battery mode: When the system is running in battery mode, the power consumption can be adjusted. ► Click on the battery symbol in the task bar. ► Choose between optimum performance and optimum battery consumption. Fujitsu...

  • Page 40: Adjusting Fan Control

    ► In the menu Advanced - Miscellaneous Configurations select the Fan Control function. ► Choose the setting Normal or Silent. Instructions for how to call up and operate the BIOS-Setup-Utility can be found in chapter "Settings in BIOS Setup Utility", Page Fujitsu...

  • Page 41: Memory Cards

    (see the documentation for your operating system). ► On devices with card locking: Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu...

  • Page 42: Loudspeakers And Microphones

    If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu...

  • Page 43: Sim Card

    ► Remove the battery, see "Removing a battery", Page ► Slide the SIM card into the slot (1) until you hear it engage, as shown in the diagrams on the battery compartment. ► Install the battery again, see "Installing a battery", Page Fujitsu...

  • Page 44: Removing The Sim Card

    "Installing a battery", Page Wireless components Wireless LAN / Bluetooth / LTE (optional) The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ► Press the key with the radio symbol to switch the wireless components on and off (flight...

  • Page 45: Setting Up Wlan Access

    Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Use a shielded network cable (CAT 5e). Fujitsu...

  • Page 46: Exclusively

    3D graphics The following options are possible: NVIDIA and Intel graphics. Enabled The system uses “NVIDIA Optimus Technology” and switches automatically between the processor graphics and the 3D graphics. NVIDIA graphics ONLY. Disabled The system permanently uses 3D graphics. Fujitsu...

  • Page 47: Your Port Replicator (Optional)

    6 = Display ports 13 = Unlocking lever 7 = VGA monitor port 8 = DVI-D screen connection The HMDI port on the notebook and Display port 1 on the port replicator cannot be used simultaneously. Fujitsu...

  • Page 48: Setting Up The Port Replicator

    • Never place the port replicator and the mains adapter on a heat-sensitive surface. • Do not expose the port replicator to extreme environmental conditions. Protect the port replicator from dust, humidity and heat. Fujitsu...

  • Page 49: Connecting The Notebook To The Port Replicator

    ► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook. ► Position the notebook so that it is in line with the back edge of the Port Replicator. ► Push the notebook onto the port replicator until it clicks into position. Fujitsu...

  • Page 50: Connecting The Mains Adapter To The Port Replicator

    "Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output. This profile will be loaded, as soon as the notebook is connected to a Port Replicator of the same type. Fujitsu...

  • Page 51: Switching On The Notebook Via The Port Replicator

    If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for about four seconds. The notebook will switch itself off. Any unsaved data may however be lost. Fujitsu...

  • Page 52: Disconnecting The Notebook From The Port Replicator

    We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu...

  • Page 53: Security Functions

    ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). The current Workplace Protect software for palm and fingerprint sensors can be found on the Internet at "http://www.fujitsu.com/fts/solutions/business-technology/security/secure/index.html". Fujitsu...

  • Page 54: Configuring The Palm Vein Sensor

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.

  • Page 55: Configuring Password Protection In Bios Setup Utility

    The notebook is then rebooted and the new password comes into effect. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Fujitsu...

  • Page 56: Password Protection For Booting Of The Operating System

    ► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu...

  • Page 57: Password Protection For The Hard Disk

    Setup Notice: Changes have been saved is displayed to confirm that the text has been saved. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook will restart and the Owner Information will be adopted. Fujitsu...

  • Page 58: Trusted Platform Module - Tpm

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...

  • Page 59: Smartcard Reader

    SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.

  • Page 60: Connecting External Devices

    For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu...

  • Page 61: Connecting An External Monitor

    "Function keys and key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. If you wish to operate the monitor via a DVI port, use the optional Port Replicator available for your notebook. Fujitsu...

  • Page 62: Connecting Usb Devices

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...

  • Page 63: Usb Port With Charging Function (Usb Type-C)

    Please note that the USB Type-C port version offers a maximum output of 5 V / 3 A. ► Connect the data cable to the external device. ► Connect the data cable to a USB port (USB Type-C) of the notebook. Fujitsu...

  • Page 64: Usb Port With Charging Function (Anytime Usb Charge)

    ► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 65: Connecting External Audio Devices

    Using the microphone connection on the optional port replicator, you can connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your notebook computer. ► Connect the audio cable to the external device. ► Connect the audio cable to the microphone port of the port replicator. Fujitsu...

  • Page 66: Headphone Jack (On The Optional Port Replicator)

    If you purchase a cable from a retailer, please note the following information: The headphone jack is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...

  • Page 67: Removing And Installing Components During Servicing

    Components After consulting the Hotline/Service desk, you may remove and install the components described in the separate manual "CELSIUS H7510 System Expansions and Repairs" yourself. Please note that some pages in that manual are marked "Service Partner only"; this means that you must not remove those components yourself. The instruction manual can be found at: "http://support.ts.fujitsu.com/download".

  • Page 68: Settings In Bios Setup Utility

    ► Press the function key ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu...

  • Page 69: Operating The Bios Setup Utility

    ► Select the option that you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (e.g. in this manual). Fujitsu...

  • Page 70: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 71: Erase Disk

    Settings in BIOS Setup Utility Erase Disk Erase Disk is a solution that is integrated into the firmware of the FUJITSU Computer (UEFI: Unified Extensible Firmware Interface), to delete all the data from a hard disk or solid state drive (SSD).
  • Page 72 • Reset administrator and user password • Load BIOS setup defaults • Shutdown the Computer • Exit Erase Disk with no additional options upon completion ► Select the function which you require. The deletion process starts. Fujitsu...

  • Page 73: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...

  • Page 74: Restoring The Hard Disk Contents Under Windows

    ► With the BIOS-Setup-Utility, you can set the date and time in the main menu. ► Please contact your sales outlet or our If the time and date are still set incorrectly after switching on the notebook. Hotline/Service Desk. Fujitsu...

  • Page 75: The Notebook's Lcd Screen Remains Blank

    ► Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). ► Switch on the external monitor and the notebook. Fujitsu...

  • Page 76: The External Monitor Is Blank Or The Image Is Unstable

    ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. The power adapter is not connected correctly. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on. Fujitsu...

  • Page 77: The Notebook Stops Working

    The wireless component is enabled. Despite ► Check whether the wireless connection is this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the wireless component can be found in the help files. Fujitsu...

  • Page 78: Smartcard Reader Is Not Recognised

    Desk will refer you to our service partner, who will unlock your device (for a charge). SmartCard lost Cause Troubleshooting SmartCard lost ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Fujitsu...

  • Page 79: Error Messages On The Screen

    Press <F1> to resume, <F2> to SETUP operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating system. BIOS Setup. Fujitsu...
  • Page 80 System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...

  • Page 81: Technical Data

    1 and 2. The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet at "http://www.fujitsu.com/fts/support/". Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/".

  • Page 82: Mains Adaptor (Notebook Computer)

    An additional mains adapter or power cable can be ordered at any time. Mains adaptor (port replicator) Technicalspecifications Electrical specifications Nominal power 330 W Rated voltage 19.5 V Max. rated current 16.9 A An additional mains adapter or power cable can be ordered at any time. Fujitsu...

  • Page 83: Manufacturer's Notes

    If the battery is not replaceable by the user, have it replaced and disposed of by an authorized service provider. Information about this subject can be found on your notebook or on our website: "https://www.fujitsu.com/emeia/about/local/csr/recycling/" Certification markings Certification markings Certification markings are listed as applicable in the "Manual Appendix - Additional Certifications"...

  • Page 84: Index

    69 Cleaning 15 Fingerprint sensor 49 Components configure 49 installing / removing 63 First-time setup Configuration, BIOS Setup Utility 64 Fn key 24 Connecting audio devices 61–62 Connecting headphones 61–62 Ctrl+Alt+Del 27 Cursor control 24 Getting started 16 Fujitsu...
  • Page 85 Microphone 38 Port Replicator 43 Microphone, connecting 61 Power Mobile operation 14 power consumption 35 Monitor power-management features 35 connecting 57 Power-on indicator 20 drifting display 72 Preparing for operation 17 remains blank 71 Printer does not print 73 Fujitsu...
  • Page 86 26 switch on 26 Tab key 24 Wireless LAN Technical data 77 Switching the module off 40 Mains adapter 78 Switching the module on 40 notebook 77 Wireless LAN: Technical specifications safety notes 13 Mains adaptor 78 Fujitsu...

Table of Contents