Fujitsu 985Tx User Manual page 73

Table 3-2 Fields, Options and Defaults for the IDE Adapter Submenu
Ultra DMA Transfer Mode: Mode 0; Mode 1;
(Available to change Mode 2; Disabled
only when Type = User
or None. Displayed for
Type = CD-ROM
or Auto with a hard
drive detected.)
C A U T I O N
A bootable CD-ROM may have either a
floppy disk format or a hard drive format.
When the bootable CD-ROM is used the
drive allocations change automatically
without changing the BIOS setup. If a
floppy disk format CD-ROM is used the
CD-ROM becomes Drive A. If a hard disk
format CD-ROM is used the internal hard
drive becomes Drive D and the CD-ROM
becomes Drive C and all other drive
C o n f i g u r i n g Y o u r L i f e B o o k 9 0 0 S e r i e s
—
designations shift as necessary. While the
boot sequence ignores the new drive
designations, your application software
will use the new designations.
C A U T I O N
Be careful of the operating environment
you use when booting from a CD-ROM
or you may overwrite files by mistake.
L i f e B o o k 9 0 0 S e r i e s f r o m F u j i t s u
Selects the Ultra DMA mode used for moving data to and from
the drive which is installed on this interface.(Auto type selects the
optimum transfer mode.) When not available to change it displays
the setting for the selected Type.
63