Fujitsu 985Tx User Manual page 56

S e c t i o n T w o
P O I N T
Save-to-Disk mode requires allocating a
significant amount of hard drive capacity
for saving all of system memory, which
reduces your usable disk space. When
you purchase your notebook it will have
space allocated for the memory installed.
If you upgrade the original system by
adding a memory upgrade module
without changing the size of your
Save-to-Disk allocation you will get an
error message when you try to activate
the Save-to-Disk mode and it will
not work. Use the PHDISK Utility to
increase the size of the Save-to-Disk
file, SAVE2DSK.BIN. (Refer to Setting
Up Your Save-to-Disk File Allocation
on pages 94–95 for more information.)
If you need help contact your support
representative for recommendations.
46
Idle Mode
Idle mode is one of the power management
parameters. When Idle mode is enabled the
CPU is put into low-speed operation when
there is no activity (keystroke, pointer action,
sound generation, video display change,
modem transmission or reception, etc.) on your
notebook for 16 seconds. Any activity will cause
the normal operation to restart automatically.
This feature is independent of the Suspend/
Resume button. This parameter is enabled
and disabled in the BIOS setup utility.
(See page 82.)
Standby Mode
Standby mode is one of the power management
parameters. When Standby mode is activated,
your notebook puts the CPU in low-sp eed oper-
ation,shuts off the display and turns off the
hard drive when there is no a ctivity (keystroke,
pointer action,sound generation, video display
change,modem transmission or reception, etc.)
on your notebook for the user selected time-out
period. (See page 83.) Any activity will cause
your notebook to return to normal operation
automatically. This feature is independent of the
Suspend/Resume button. This parameter is
enabled and disabled in the BIOS setup utility.
(See page 83.)
Video Timeout
The Video Timeout is one of the power man-
agement parameters which saves power by
turning off the display if there is no keyboard
or pointer activity for the user selected timeout
period. Any keyboard or pointer activity will
cause the display to restart automatically. This
feature is independent of the Suspend/Resume
button. This parameter is enabled and disabled
in the BIOS setup utility. (See page 82.)
Hard Drive Timeout
The Hard Drive Timeout is one of the power
management parameters which saves power by
turning off the hard drive if there is no hard
drive access for the timeout period which has
been set in the BIOS setup utility. (See page 82.)
Any attempt to access the hard drive will cause
the hard drive to restart automatically. This
feature is independent of the Suspend/ Resume
button. This parameter is enabled and disabled
in the BIOS setup utility.